GE 200D8074P037 LEVEL THE DOORS, 5LEVEL THE REFRIGERATOR, 4PUT THE REFRIGERATOR IN PLACE, NOTE:, To align:, clockwise to raise, To adjust the rollers:

Installation Instructions

4PUT THE REFRIGERATOR IN PLACE

Move the refrigerator to its final location.

5LEVEL THE REFRIGERATOR

The refrigerator can be leveled by adjusting the rollers located near the bottom hinges.

Rollers

Raise

Rollers have three purposes:

•Rollers adjust so the door closes easily when opened about halfway. (Raise the front about 5/8″ [16 mm] from the floor.)

•Rollers adjust so the refrigerator is firmly positioned on the floor and does not wobble.

•Rollers allow you to move the refrigerator away from the wall for cleaning.

To adjust the rollers:

•Turn the roller adjusting screws clockwise to raise

the refrigerator, counterclockwise to lower it. Use a 3/8″ hex socket or wrench, or an adjustable wrench.

Roller adjusting screw

6

A

B

LEVEL THE DOORS

Adjust the refrigerator door to make the doors even at the top.

To align:

Using a 7/16″ wrench, turn the door adjusting screw to the right to raise the door, to the left to lower it.

NOTE:

A nylon plug, imbedded in the threads

of the pin, prevents the pin from turning unless a wrench is used.

After one or two turns of the wrench, open and close the refrigerator door and check the alignment at the top of the doors.

Doors should be even at top

Raise

7/16″ wrench

23