Installation Instructions
6
REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or reversal of the handles – on some models)
Stainless steel (on some models):
AREMOVING
THE DOOR |
| |
HANDLE: Loosen |
| |
the set screws | Badge | |
with the 3/32″ | A | |
Allen wrench |
| |
and remove |
| |
the handle. | B | |
NOTE: For |
| |
Double Door | Mounting | |
models follow | ||
Fasteners | ||
the same | (appearance may vary) | |
procedure on | ||
| ||
the opposite door. |
|
Plastic handle (on some models):
AREMOVING THE DOOR HANDLE: Depress the tab on the underside of the handle and slide the handle up and off of the mounting fasteners.
REVERSING THE |
| |
DOOR HANDLE |
| |
(on some | B | |
models): |
| |
• Remove | Badge | |
the handle |
| |
mounting | A | |
fasteners with | ||
a 3/16″ Allen |
| |
wrench and | Mounting | |
transfer | ||
Fasteners | ||
the handle | ||
| ||
mounting | (appearance may vary) | |
fasteners to |
| |
the right side. |
|
• Remove the logo badge. |
• Remove and transfer the plug button to |
the left side of the fresh food door. NOTE: |
Use a flat plastic edge to prevent damaging |
the door. Remove any adhesive on the door |
with a mild detergent . Remove the paper |
covering on the adhesive backing on |
the logo badge prior to carefully attaching |
the badge to the door. |
7REMOVE THE FREEZERDOORHANDLE
Stainless steel and plastic handles:
ALoosen the set screws located on the underside of the handle with the 1/8″ Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or removed, use a 3/16″ Allen wrench.
A 
17
