Installation Instructions
REVERSINGTHEDOORSWING (cont.)
5
A
B
C
INSTALL BOTTOM HINGE AND LEVELING LEG
Using a 1/2″ socket ratchet/driver, install the hinge pin and nut in the opposite hole on the hinge bracket with leveling leg.
Using a 5/16″ socket ratchet/driver, install the hinge bracket with leveling leg on the left side of the refrigerator. The pin will be toward the outside of the refrigerator.
Using a 5/16″ socket ratchet/driver, install the leveling leg bracket on the right side of the refrigerator.
6TRANSFER REFRIGERATOR AND FREEZER DOORSTOPS
ARemove the door stop on the right side of the bottom of the door by removing the two screws.
BMove the plastic hinge hole thimble to the opposite hole.
CInstall the door stop on the left side, making sure to line up the screw holes in the door stop with the holes in the bottom of the door.
A
Bottom of Door (Right Side) | Bottom of Door (Left Side) |
7TRANSFER REFRIGERATOR DOORHANDLE TORIGHT
Refer to Remove the Fresh Food Door Handle and Attach the Fresh Food Door Handle sections for instructions.
8REHANGFREEZERDOOR
ALower the freezer door onto the bottom hinge pin. Ensure that the plastic hinge pin thimble is on the hinge pin or inside the door hinge pin hole located in the bottom of the door.
BStraighten the door and line it up with the center hinge bracket .
CInstall the center hinge pin with a 3/4″ socket ratchet/driver. Turn it until it extends through the hinge bracket and into the freezer door.
24
