GE 200D9366P004 operating instructions Remove The Freezer Door, TRANSFER CENTER HINGE BRACKET cont

Installation Instructions

2REMOVE THE FREEZER DOOR

ATape the door shut with masking tape.

BRemove hinge pin from hinge bracket . This will be used again with the new hinge bracket for the other side.

CRemove the tape and tilt the door away from the cabinet . Lift the door off the bottom hinge pin.

DRemove the button plug from the left side of the door. Remove the door thimble from the right side of the door. Install the door thimble into the hole on the left and the button plug into the hole on the right .

ESet the door on a non-scratching surface, with the inside up.

3TRANSFER CENTER HINGE BRACKET

AUsing a 5/16″ socket ratchet/driver, remove the bolts securing the center hinge to the cabinet .

3TRANSFER CENTER HINGE BRACKET (cont.)

BTransfer the plug button and screw hole cover in the hinge holes on the left side to the right side.

CInstall the new center hinge bracket from the kit on the left side.

4REMOVE BOTTOM HINGE AND LEVELING LEG

AUsing a 1/2″ socket ratchet/driver, remove the

nut and hinge pin from the hinge bracket with leveling leg. Using a 5/16″ socket ratchet/driver, remove the screws from the bottom hinge bracket . These will be reinstalled on the

other side.

Bottom Hinge

Bracket

BUsing a 5/16″ socket ratchet/driver, remove the screws from the leveling leg bracket on the other side. These will be reinstalled on the opposite side.

Leveling Leg

Bracket

23