GE 21029 manual Exit, Handset to Handset Paging, Paging from the Base/Group

•Press the cid/vol () button to review the newest call and scroll to older calls (lower numbers).

2.Press theTALK/END/call back or SPKR buttons.The number dials automatically.

If you get a busy signal and want to keep dialing the number, press the REDIAL button to quickly redial the number.

Exit

Press the *exit button to exit a menu function and return to the standby screen.

Page

The page feature helps you locate a misplaced handset.To send and receive pages, all handsets must be registered. If your handset is not registered, follow the instructions in the Registration section of this manual.

Handset to Handset Paging

Handsets are named HANDSET 1, HANDSET 2, and HANDSET 3 respectively.

1.Make sure the phone is OFF (not in talk mode).

2.Press and release the page/int button on a handset. PAGING EXTENSION? shows in the display.

3.Use the touch-tone pad to enter the handset number you want to page.

NOTE: If more than 2 handsets have been registered, you can page all handsets by pressing 5.

4.To cancel the page, press the *exit button, or press the page/int button. Or you may pressTALK/END/call back on the receiving handset to enter intercom mode.

Paging from the Base/Group Page

Use the base-only to page all registered handsets at the same time.

1.Press the PAGE button on the base. All handsets beep for two minutes, and PAGING FROM BASE shows on each handset’s display.

2.To cancel the page, press the PAGE button on the base, or press theTALK/ END/call back button or the *exit button on each handset.

33