GE 21029 manual Intercom Operation, Mute, Receiver Volume Control, Do Not Disturb DND

Mute

To have a private, off-line conversation, use the MUTE feature.The party on the telephone line cannot hear you, but you can hear them.

1.Press the mute/prog button.The handset display shows MUTE ON.

2.Press the mute/prog button to cancel and return to your phone conversation.

Receiver Volume Control

When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the cid/vol ( or ) button.There are four volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.

Do Not Disturb (DND)

DND allows you to turn off the ringer on the handsets and call screening on the answerer at once even though the handsets have been set to High or Low.To do this,

1.In the standby mode, press the DO NOT DISTURB button on the base.The DND backlit indicator will turn on and DO NOT DISTURB shows in each handset display.

2.To cancel, press DO NOT DISTURB again.

NOTE: You can also enable DND even when there is incoming call ringing in.

NOTE: You can also enable DND to stop the call screening after the call is taken by the answerer.

Intercom Operation

The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line. And since the telephone line is not in use, you may still receive incoming calls.

Making an Intercom Call

1.Make sure the phone is OFF (not in talk mode).

2.Press the page/int button on the handset.

3.Use the touch-tone pad to select the handset you want to page.

34