Making a Call with Speakerphone

1.Make sure the phone is OFF (not in talk mode).

2.Dial the desired number

-OR-

Press the cid/vol (or ) button to select the desired record, -OR-

Press mem button and then use cid/vol (or ) button to scroll to desired memory record.

3.Press SPKR to dial number

4.When finished, press the SPKR button again to hang up.

NOTE: If you are using the handset earpiece and want to switch to the speakerphone, press the SPKR button, you can then press SPKR again to end conversation. If you are using the speakerphone and want to switch to the handset earpiece, press the TALK/END/call back button, you can then press TALK/END/call back again to end conversation.

Call Timer

After you press the TALK/END/call back button on the handset, the built-in call timer shows on the display and counts the length of time of the call in minutes and seconds.

Pre-Dialing

1.Make sure the phone is OFF (not in talk mode).

2.Enter the telephone number you want to call.The telephone number shows in the handset display.

3.Press theTALK/END/call back or SPKR buttons on the handset, and the number automatically dials.

NOTE: You may enter up to 32 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the del button until all of the digits are erased, or press the *exit button to erase all numbers at once.

Auto Standby

If you place the handset in the cradle while the handset is off the hook (during a call), the call is automatically disconnected.

31

Page 31
Image 31
GE 21029 manual Making a Call with Speakerphone, Call Timer, Pre-Dialing, Auto Standby