Installing the water line.

Read these instructions completely and carefully.

Connect the Tubing to the Refrigerator

Before making the connection to the refrigera- tor, be sure the refrigerator power

cord is not plugged into the wall outlet.

One of the illustrations below will look like the connection on your refrigerator.

We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1 Remove the plastic flexible cap from the water valve (refrigerator connection).

2 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

3 Insert the end of the copper tubing into the water valve refrigerator connection as far as possible. While holding the tubing, tighten

1/4Copper

Tubing

Remove screws and fold back access cover.

OR

Tubing Clamp

1/4Compression Nut

Ferrule

(sleeve)

Refrigerator

Connection

Installation Instructions OperatingInstructions SafetyInstructions

the fitting.

4 Fasten the copper tubing into the clamp provid- ed to hold it in position. You may

need to pry open the clamp.

Tubing Clamp

1/4Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

1/4Copper

Tubing

TroubleshootingTips

Turn the Water On at the Shutoff Valve

1

Tighten any connections that leak.

2

Replace the access cover and screws (on some

 

models).

Plug In the Refrigerator

 

 

Arrange the coil of copper tubing so that it does not

Push the refrigerator back to the wall.

vibrate against the back of the refrigerator or against

 

 

the wall.

 

 

CustomerService

Start the Icemaker

Set the icemaker feeler arm to the ON (down) posi- tion. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation auto- matically if the icemaker feeler arm is in the

ON (down) position.

NOTE: The icemaker may double-cycle when it first starts, causing some water spillage from the icemaker into the ice bucket. This is normal and should not happen again.

20

Page 20
Image 20
GE 22-27 owner manual Connect the Tubing to the Refrigerator, Plug In the Refrigerator, Start the Icemaker

22-27 specifications

The GE 22-27 is a versatile and efficient locomotive designed for a variety of rail transport applications. It showcases General Electric's commitment to innovation and performance in the rail industry. The 22-27 model is particularly known for its robust engineering and technological advancements that enhance its operational capabilities.

One of the main features of the GE 22-27 is its impressive power output, which is generated by a highly efficient diesel engine. This locomotive is equipped with a state-of-the-art 12-cylinder engine that delivers an output ranging typically from 2000 to 3000 horsepower. This significant power allows the locomotive to handle heavy freight loads while maintaining reliable speed and efficiency.

In terms of technology, the GE 22-27 incorporates advanced electronic controls that optimize engine performance and fuel consumption. The use of microprocessor-based control systems provides improved diagnostics and maintenance capabilities, enabling operators to monitor the health of the locomotive in real time. By utilizing these modern technologies, the GE 22-27 reduces downtime and increases overall productivity for rail operators.

Another characteristic of the GE 22-27 is its superior traction capabilities. The locomotive features a sophisticated traction control system that ensures optimal performance on various terrains and track conditions. This system allows for better acceleration and deceleration, making it suitable for both heavy freight and passenger transport.

The design of the GE 22-27 also emphasizes operator comfort and safety. The cab is ergonomically designed with user-friendly controls, allowing for easier navigation and operation for the crew. Additionally, the locomotive is equipped with modern safety features, including advanced braking systems and enhanced visibility aids, ensuring safe operation in diverse environments.

Moreover, the GE 22-27 is built with durability in mind. Its construction incorporates high-quality materials that withstand the rigors of heavy-duty usage, resulting in a long service life with minimal maintenance needs. This durability, combined with the locomotive's efficiency, ultimately translates into lower operational costs for railway companies.

In conclusion, the GE 22-27 locomotives stand out in the rail industry due to their powerful performance, advanced technology, traction capabilities, and focus on safety and operator comfort. These characteristics make them an excellent choice for rail operators looking for a reliable and efficient locomotive solution.