GE 22-27 Monitor and Diagnostic System, About the controls on the refrigerator, CustomerService

TroubleshootingTips InstallationInstructions Operating Instructions Safety Instructions

CustomerService

About the controls on the refrigerator.

On some models. The controls will look like one of the following.

The Electronic Monitor and Diagnostic System controls dispenser functions and monitors the operation of your refrigerator.

				DISPLAY
					POWER	SYSTEM
N O R M A L	DOOR		WARM		DEFROST
						CHECK
	OPEN		TEMP		FREEZER
						RESET
					ICEMAKER
CHILLED	CRUSHED		DISPENSER PUSH BELOW		CUBED	DOORALARM
WATER		ICE			ICE	ON/OFF

Monitor and Diagnostic System

NORMAL lights up to indicate that no failure has been detected by the diagnostic system.

DOOR OPEN flashes when either door is open.

WARM TEMP lights up when freezer food-keeping temperature is above normal.

Flashing diagnostic codes. What these codes mean—and what to do when they appear—is explained more thoroughly on the following pages.

SYSTEM CHECK-RESET reviews the diagnosis of four coded functions and allows you to erase codes from the display.

Select CUBED ICE , CRUSHED ICE or WATER and the signal light confirms your choice.

DOOR ALARM lights up when the beeper has been set to sound after either door has been open 30 seconds.

6