HP E1Y97UT 11.6' E1Y97UT#ABA Hewlett-Packard Vision Diagnostics, Accessing HP Vision Diagnostics

8 Computer Diagnostic Features

Hewlett-Packard Vision Diagnostics

NOTE: HP Vision Diagnostics is included on CD with some computer models only.

The Hewlett-Packard Vision Diagnostics utility allows you to view information about the hardware configuration of the computer and perform hardware diagnostic tests on the subsystems of the computer. The utility simplifies the process of effectively identifying, diagnosing, and isolating hardware issues.

The Survey tab is displayed when you invoke HP Vision Diagnostics. This tab shows the current configuration of the computer. From the Survey tab, there is access to several categories of information about the computer. Other tabs provide additional information, including diagnostic test options and test results. The information in each screen of the utility can be saved as an html file and stored on a USB flash drive.

Use HP Vision Diagnostics to determine if all the devices installed on the computer are recognized by the system and functioning properly. Running tests is optional but recommended after installing or connecting a new device.

You should run tests, save the test results, and print them so that you have printed reports available before placing a call to the Customer Support Center.

NOTE: Third party devices may not be detected by HP Vision Diagnostics.

Accessing HP Vision Diagnostics

To access HP Vision Diagnostics, you must create a Recovery Disc Set then boot to the CD containing the utility. It can also be downloaded from http://www.hp.com and either burned to CD or installed to a USB flash drive. See Downloading the Latest Version of HP Vision Diagnostics on page 142 for more information.

NOTE: If you have already downloaded HP Vision Diagnostics to a CD, then begin the following procedure at step 2.

1.In Windows Explorer, go to C:\SWSetup\ISOs and burn the file Vision Diagnostics.ISO to a CD.

2.While the computer is on, insert the CD in the Optical Drive on the computer.

3.Shut down the operating system and turn off the computer.

4.Turn on the computer. The system will boot into HP Vision Diagnostics.

138 Chapter 8 Computer Diagnostic Features