HP E1Y97UT 11.6' E1Y97UT#ABA manual 13Removing a PCI Express x1 Expansion Card Expansion Cards

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

a.If you are installing an expansion card in a vacant socket, you must use a flatblade screwdriver to pry out the metal shield on the rear panel that covers the expansion slot. Be sure to remove the appropriate shield for the expansion card you are installing.

Figure 5-12Removing an Expansion Slot Cover

b.If you are removing a standard PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket then away from the inside of the chassis to release it from the chassis frame. Be sure not to scrape the card against the other components.

Figure 5-13Removing a PCI Express x1 Expansion Card

Expansion Cards 57