HP E1Y97UT 11.6' E1Y97UT#ABA manual Power Switch/LED Assembly

Power Switch/LED Assembly

1.Prepare the computer for disassembly (Preparation for Disassembly on page 42).

2.Remove the access panel (Access Panel on page 43).

3.Lay the computer on its side with the front facing toward you.

4.Remove the front bezel (Front Bezel on page 44).

5.Remove the optical drive (Removing an Optical Drive on page 68).

6.Remove the hard drive (Removing the Hard Drive on page 114).

7.Disconnect the cable from the black system board connector.

8.Remove the cable from the clips under the hard drive cage. Figure 6-33Removing the power switch cable

Power Switch/LED Assembly 119