HP E1Y97UT 11.6' E1Y97UT#ABA manual Microsoft System Restore, System Recovery

7 Restore and Recovery

Microsoft System Restore

If you have a problem that might be due to software that was installed on your computer, use System Restore to return the computer to a previous restore point. You can also set restore points manually.

NOTE: Always use this System Restore procedure before you use the System Recovery program.

NOTE: Some features might not be available on systems that are shipped without a version of Microsoft Windows.

To start a System Restore:

1.Close all open programs.

2.Click the Start button, right-click Computer, and then click Properties.

3.Click System protection, System Restore, click Next, and then follow the onscreen instructions.

To add restore points manually:

1.Close all open programs.

2.Click the Start button, right-click Computer, click Properties, and then click System protection.

3.Under Protection Settings, select the disk for which you want to create a restore point.

4.Click Create, and then follow the onscreen instructions.

System Recovery

System Recovery completely erases and reformats the hard disk drive, deleting all data files you have created, and then reinstalls the operating system, programs, and drivers. However, you must reinstall any software that was not installed on the computer at the factory. This includes software that came on media included in the computer accessory box, and any software programs you installed after purchase.

NOTE: Always use the System Restore procedure before you use the System Recovery program. See Microsoft System Restore on page 133.

Microsoft System Restore 133