HP E1Y97UT 11.6' E1Y97UT#ABA manual Using Computer Setup F10 Utilities

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access the Computer Setup Utilities menu, complete the following steps:

1.Turn on or restart the computer.

2.As soon as the computer is turned on, press F10 before the system boots to the operating system to enter Computer Setup. Press Enter to bypass the title screen, if necessary.

NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again press F10 before the unit boots to the operating system to access the utility.

3.The Computer Setup Utility screen is divided into menu headings and actions. Six menu headings appear on the Computer Setup Utility screen:

●Main

●Advanced

●Boot

●Power

●PC Health

●Exit

Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc.

4.To apply and save changes, press the F10 key.

If you have made changes that you do not want applied, press the F5 key to return to the previous values.

To load optimized default values, press the F7 key.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.

Table 2-1	Computer Setup (F10) Utility Main Menu
Heading	Table
Main	Computer Setup—Main on page 6
Advanced	Computer Setup—Advanced on page 7
Boot	Computer Setup—Boot on page 8
Power	Computer Setup—Power on page 9
PC Health	Computer Setup—PC Health on page 10
Exit	Computer Setup—Exit on page 10

HP Pro 2110 – Computer Setup (F10) Utilities 5