HP E1Y97UT 11.6' E1Y97UT#ABA manual 15Computer Setup-Power, 16Computer Setup-Boot, NX No Execute

Computer Setup—Power

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 2-15Computer Setup—Power

OptionDescription

After AC Power Allows you to select system restart behavior after power loss:

Failure

●Stay Off

●Power On

●Auto

S5 Maximum Power Disables/enables S5 Maximum Power Savings. Enabling this feature reduces the power of this

Savingssystem as much as possible in the S5 state. This feature must be disabled if you want to enable Wake on LAN from S5.

WOL in S5	Disables/enables limited Wake on LAN from S5. Note that the computer can only wake from S5
	during a normal shutdown event. The S5 Maximum Power Savings feature must be disabled in
	order to enable limited Wake on LAN from S5.
NX (No Execute)	Allows you to disable/enable the processor's NX feature.
Virtualization	Allows you to enable/disable the processor's Virtualization Technology feature.
Technology

Computer Setup—Boot

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 2-16Computer Setup—Boot

Option	Description
Boot-time	Disables/enables POST diagnostic messages display during boot.
Diagnostic
Screen

HP Pro 3125 – Computer Setup (F10) Utilities 21