HP E1Y97UT 11.6' E1Y97UT#ABA manual Access Panel

Access Panel

1.Prepare the computer for disassembly (Preparation for Disassembly on page 42).

2.Loosen the screw (1) that secures the access panel to the computer chassis.

3.Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit.

NOTE: You may want to lay the computer on its side to install internal parts. Be sure the side with the access panel is facing up.

Figure 5-1Removing the Computer Access Panel

To replace the access panel, reverse the removal steps.

Access Panel 43