HP E1Y97UT 11.6' E1Y97UT#ABA manual

5.Press down on the tab in front of the power supply on the inside of the chassis. Figure 6-36Power supply tab

6.Pull the power supply toward the front of the chassis, and then lift the power supply up and out of the chassis.

Figure 6-37Removing the power supply

NOTE: If the power supply includes a voltage select switch, make sure to set the red switch to the setting (230 V or 115 V) appropriate for the country in which the computer is used. Spare power supplies normally arrive set for 230 V.

To install the power supply, reverse the removal procedure.

Power Supply 127