HP E1Y97UT 11.6' E1Y97UT#ABA manual Optical Drive Eject Button

Optical Drive Eject Button

The optical drive eject button is mounted to the front of the chassis under the front bezel. It has a cable that plugs into the back of the optical drive.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 42).

2.Remove the access panel (Access Panel on page 43).

3.Lay the computer on its side with the front facing toward you.

4.Remove the front bezel (Front Bezel on page 44).

5.Disconnect the cable from the rear of the optical drive. Figure 6-17Optical drive eject button cable

Optical Drive Eject Button 107