Rated Input Current (maximum)1 | 6A @ 100 VAC | 3A @ 200 VAC |
1This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch.
Small form factor models
Desktop Dimensions |
|
|
Height | 4.43 in | 11.25 cm |
Width | 12.25 in | 31.12 cm |
Depth | 15.33 in | 38.94 cm |
|
|
|
Approximate Weight |
|
|
HP Pro 2110 | 14.75 lb | 6.69 kg |
HP Pro 3120 | 14.59 lb | 6.62 kg |
HP Pro 3130 | 14.60 lb | 6.62 kg |
|
|
|
Temperature Range |
|
|
Operating | 50° to 95°F | 10° to 35°C |
Nonoperating | ||
|
|
|
Relative Humidity (noncondensing) |
|
|
Operating | ||
Nonoperating (38.7°C max wet bulb) | ||
|
|
|
Maximum Altitude (unpressurized) |
|
|
Operating | 10,000 ft | 3048 m |
Nonoperating | 30,000 ft | 9144 m |
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Power Supply | 115V | 230V |
Operating Voltage Range | ||
Rated Voltage Range | ||
Rated Line Frequency | ||
|
|
|
Power Output | 270 W | 270 W |
|
|
|
Rated Input Current (maximum)1 | 6A @ 100 VAC | 3A @ 200 VAC |
1This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union. This supply requires the use of an input voltage range select switch.
Small form factor models 195