Anti-tip bracket installation
(cont.)
Anti-Tip Bracket Installation
36”
Remove Grilles for Access to
Hooks
Fresh Food Unit
2SHQWKHDFFHVVGRRU
• Remove the 4 screws from the grille.
•Pull the bottom of the grille forward, down and out to remove.
Freezer Unit
2SHQWKHDFFHVVGRRU
• Remove the 4 screws from the grille.
• Pull the bottom of the grille forward, down and out to remove.
Power Cord
Locate the power cord inside the left cavity. If it has not been adjusted so the plug is easily accessible, do so now.
Move Unit into Final Position
• Move refrigerator toward its final installed location. Align the tabs on the wall bracket with the openings in the back of the unit.
• The unit has “L” bolts in the upper left and right corners inside of the access compartment. These bolts will interlock with the wall bracket and secure the unit using the washers and hair pin cotters in the hardware kit once the unit has been leveled and is in the final position.
18
