Automatic Icemaker (freezer models)
36”
Automatic icemaker
(freezer models)
A
The icemaker will produce seven cubes per
F\FOH³DSSUR[LPDWHO\F\FOHVLQDKRXU period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions.
If the refrigerator is operated before the water connection is made to the icemaker, set the power switch to OFF.
When the refrigerator has been connected
to the water supply, set the power switch to ON. Throw away the first full bucket of ice.
Be sure nothing interferes with the sweep of the feeler arm.
When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.
It is normal for several cubes to be joined together.
If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.
Icemaker
Power | Feeler Arm | |
Switch | ||
|
After the icemaker has been turned on again, there will be a delay of about 45 minutes before the icemaker resumes operations.
NOTE: In homes with
NOTE: Icemaker works best between
40 and 120 PSI home water pressure.
Accessing the icemaker and ice storage bin
(freezer models)
The icemaker is located behind the first drawer on the right of the freezer. The ice bin
is the second drawer.
2Q2IIVZLWFK
Icemaker
Ice bin
To remove the ice bin:
2SHQWKHDFFHVVGRRUWRUHDFKWKHLFHPDNHU6HW the icemaker power switch to the OFF position. With the access door closed, support the storage bin at the bottom while slightly lifting. Pull bin straight out. See Drawer Removal section.
To replace the ice bin: Slide the bin back until the tab on the bin locks into the slot on the shelf. After replacing the ice bin, open the access door to reach the icemaker. Set the icemaker power switch to the ON position.
9
