About the ice and water dispenser on some models

About the ice and water dispenser (on some models).

Tips Installation Instructions Operating Instructions Safety Instructions

To Use the Dispenser

Select CUBED ICE , CRUSHED ICE

or WATER .

Press the glass gently against the top of the dispenser cradle.

The spill shelf is not self-draining. To reduce water spotting, the shelf and its grille should be cleaned regularly.

If no water is dispensed when the refrigerator is first installed, there may be air in the water line

Spill Shelfsystem. Press the dispenser arm for at least two minutes to remove trapped air from the water line and to fill the water system. To flush out impurities in the water line, throw away the first six glassfuls of water.

CAUTION: Never put fingers or any other objects into the ice crusher discharge opening.

Locking the Dispenser

Press the LOCK CONTROL pad for 3 seconds to lock the dispenser and control panel. To unlock, press and hold the pad again

for 3 seconds.

Dispenser Light

This pad turns the night light in the dispenser on and off. The light also comes on when the dispenser cradle is pressed. If this light burns out, it should be replaced with a 6 watt 12V maximum bulb.

Quick Ice (on some models)

When you need ice in a hurry, press this pad to speed up ice production. This will increase ice production for the following

48 hours or until you press the pad again.

Door Alarm

To set the alarm, press this pad until the indicator light comes on. This alarm will sound if either door is open for more than 3 minutes. The light goes out and the beeping stops when you close the door.

Consumer Support Troubleshooting

Important Facts About Your Dispenser

■Do not add ice from trays or bags to the storage drawer. It may not crush or dispense well.

■Avoid overfilling glass with ice and use of narrow glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

■Beverages and foods should not be quick-chilled in the ice storage drawer. Cans, bottles or food packages in the storage drawer may cause the icemaker or auger to jam.

■To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.

■Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.

■After crushed ice is dispensed, some water may drip from the chute.

■Sometimes a small mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

25 and 27 specifications

The GE 25 and 27 series represent a significant evolution in the realm of gas turbine technology, tailored for both industrial and power generation applications. These advanced turbines are well-regarded for their impressive efficiency, reliability, and adaptability to various operational needs.

The GE 25 engine, known for its robust design, is specifically engineered to deliver high performance in a compact footprint. It boasts a power output of approximately 25 megawatts, making it suitable for a variety of applications, including peak power generation and co-generation systems. Its features include advanced aerodynamics in the compressor section, ensuring optimal airflow and reduced pressure losses. The turbine also incorporates a sophisticated control system, enabling real-time adjustments that optimize performance while minimizing emissions.

In contrast, the GE 27 turbine achieves even greater power output, reaching up to 27 megawatts. This engine is designed with an emphasis on efficiency and reduced operational costs, making it an attractive choice for utility operators and industrial power plants. One of its key technologies includes the use of advanced materials in the turbine blades, which allow for higher operating temperatures and pressure ratios. This innovation translates to a significant boost in thermal efficiency, reducing fuel consumption and environmental impact.

Both the GE 25 and 27 utilize advanced diagnostic tools and monitoring systems. These technologies enable operators to track engine performance effectively, predicting maintenance needs and enhancing overall operational reliability. The inclusion of digital twin capabilities allows for real-time simulations that can identify potential inefficiencies before they develop into serious issues.

The modular design of these turbines facilitates quick maintenance and parts replacement, minimizing downtime and ensuring continuous power supply. Additionally, their versatility makes them suitable for a wide range of fuels, including natural gas, diesel, and even renewable biogas. This adaptability positions the GE 25 and 27 as forward-thinking solutions that align with the global push towards greener energy sources.

In summary, the GE 25 and 27 turbines exemplify modern gas turbine technology, merging high efficiency with innovative features. Their ability to perform under a variety of conditions while maintaining low emissions places them at the forefront of power generation advancements. As industries continue to seek reliable and sustainable energy solutions, the GE 25 and 27 stand as compelling options for both current and future power demands.

GE 25 and 27 About the ice and water dispenser on some models, To Use the Dispenser, Door Alarm

Models: 25 and 27