GE 28118 manual Set Language, Handset Name, From the Handset Setup Menu

Handset Setup

1.Make sure your phone is OFF (not in talk mode).

2.Press the menu ok/mute button to go to the main menu.

3.Press vol/CID ( 6 or 5) button to scroll to HANDSET SETUP.

4.Press the menu ok/mute button to confirm and you may program the following items: Set Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Message Alert, Rings to Answer, Security Code, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.

NOTE: During programming, you may press the end button at any time to exit the sub-menu and return to the menu.

Set Language

From the Handset Setup Menu:

1.Press the vol/CID ( 6 or 5) button to scroll to the SET LANGUAGE sub-menu.

2.Press the menu ok/mute button to enter the menu. SET LANGUAGE 41ENG 2FRA 3ESP shows in the display. The default setting is 1ENG.

3.Use the touch tone pad on the handset to select 1ENG, 2FRA, 3ESP, or use the vol/CID ( 6 or 5) button to scroll to the desired language.

4.Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected language shows in the display.

Handset Name

From the Handset Setup Menu:

1.Press the vol/CID ( 6 or 5) button to scroll to the HANDSET NAME sub-menu.

2.Press the menu ok/mute button to enter the menu. HANDSET NAME shows in the display. The default setting is HANDSET #.

3.Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for the letter T; press the 4 key twice for the letter H.

NOTE: If you make a mistake, use the del/conf/intercom button to backspace and delete one character at a time.

16