9
Handset Setup
6. Place the handsets in the charge cradles.
The blue CHARGE indicator turns on,
verifying the batteries are charging.
Allow handset to charge for 1 hours prior
to rst use. If you do not properly charge
the handset, battery performance is
compromised.

Handset Registration

For accessory handsets (without Base unit),
an auto-registration mechanism is available
so the unregistered accessory handset can be
automatically registered without the need of
entering a PIN code.
On the base:
1. Put the base into subscription mode, by
pressing and holding the PAGE button for at
least 8 seconds.
2. The DECT indicator light starts ashing. It
is now ready to be associated with a new
handset. This registration mode lasts 90
seconds after pressing the button. Once the
subscription is done, the base LED ashing
is switched off.
On the handset:
1. Make sure your phone is OFF (not in talk
mode).
2. Press , navigate to the Registration
menu, press to enter.
3. Use or to scroll to Register Handset.
NOTE: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
NOTE: A handset can be
registered to only one
base.
NOTE: When a handset is
associated with a base,
a number is given to the
handset by the base.
This number is displayed
on the handset after the
name and must be used
for internal calls.
NOTE: A handset can be
registered to only one
base.