Vertex Standard H.16, H.8 6-5-2. Camera ID setup , 6-5-3. Baud Rate Setup , 6-5-4. Duration Setup , 6-5-5. Tour Setup

VerteX RTH Series H.8 and H.16 Series
56
 From the PTZ Setup menu, select the PTZ protocol for the channel you want to set using the arrow keys
and the Select button.
[Figure 5-44. PTZ Protocol Window]
 On the selection window, select the PTZ protocol using the arrow keys and the Select button.
6-5-2. Camera ID setup
Camera ID refers to the address used for communicating with the PTZ camera.
The camera ID must be the same as the ID set in the PTZ camera.
Different methods are used to set the address of the PTZ camera depending on the
camera manufacturer or model. Refer to the camera manual of each manufacturer for the
correct information.
 From the PTZ Setup menu, select the camera ID for the channel using the arrow keys and the Select
button.
 In the selection box, select the camera ID using the arrow keys and the [Select] button.
6-5-3. Baud Rate Setup
The transmission rate refers to the speed of communication with the PTZ camera.
The Baud rate must be the same as the communication speed of the PTZ camera.
The Baud rates and setup methods for PTZ cameras vary by camera manufacturer or
model. Refer to the camera manual for details.
 From the PTZ Setup menu, select the Baud rate for the channel using the arrow keys and the Select button.
 On the selection window, select the Baud speed using the arrow keys and the Select button.
6-5-4. Duration Setup
Tour interval time (select between 5 and 60 seconds).
 From the Preset Setup menu, select the preset time for the channel using the arrow keys and the Select
button.
 In the selection box, set the duration using the arrow keys and the [Select] button.
6-5-5. Tour Setup
Automatically controls the preset PTZ camera according to the predefined order.