VerteX RTH Series H.8 and H.16 Series
42
the user, and the related log, saved.
If synchronization with the NTP server fails, synchronization with RTC will be established.
2) Synchronization with the DVR Time Server
The DTS server is executed in the VERTEX RTH, H.8 AND H.16-series; time is synchronized every hour.
VERTEX RTH, H.8 AND H.16 series DTS clients referring to the DTS synchronize the time of the DVR
system operating with DTS.
When the DTS time or a zone is changed, the change is reflected on the VERTEX RTH, H.8 AND H.16
series belonging to the network (the synchronization signals are broadcasted without passing through the
router or gateway). The DVR time server does not support automatic connection.
2. Daylight saving time (DST) setup
Regardless of whether GPS, NTP server, or DST server is referred to, DST is automatically processed
according to the time.
3. User time setup
The user can set the time directly.
For the NTP client setup, the user can read the time but not change it
Move to {Menu} Æ {Setup} Æ {Time} to set up Time Function.
6-1-1. Time Sync
[Figure 5-28. Time Sync]
A. Time Sync
OFF The time server is not used.
NTP NTP is used to set the time for the time DVR.
B. NTP
{NTP} setup is available when {Time Sync} is set as NTP.
C. Server Type Setup
 Select {Server Type} using the arrow keys and the Select button.
In the selection box, select the server type using the arrow keys and the [Select] button.
D. Server URL
 Select {Server URL} using the arrow keys and the Select button.
 In the selection box, select the server URL using the arrow keys and the [Select] button.
 The user can enter the IP only when the server type is DVR. For the NTP server, Automatic, IP, or URL
should be selected.