NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle.

NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the SPEAKER button to quit room monitor and answer the call.

NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the TALK/CALL BACK button once. Switch back to speakerphone by pressing the SPEAKER button once.

NOTE: Press the *tone/exit button on the handset to exit room monitor mode.

Handset Setup

1.Make sure your phone is OFF (not in TALK mode).

2.Press the program/mute button to go to the main menu.

3.Press caller ID-volume ( 6 or 5) button to scroll to

HANDSET SETUP.

4.Press program/mute button to confirm and you may program the following items: Set Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key Tone, Audio Predial, Vibrate Ringer, Area Code, Tone/Pulse, Registration, Deregistration and Default Setting.

21

Page 21
Image 21
GE 29111 manual Handset Setup