GE 29111 manual Tone/Pulse, Registration

4.Press the program/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display.

NOTE: To restore the default setting to - - -, press and release delete when SET AREA CODE shows in the display.

Tone/Pulse

From the Handset Setup Menu:

1.Press the caller ID-volume ( 5 or 6) button to scroll to the TONE PULSE sub-menu.

2.Press program/mute button to enter the menu. TONE/ PULSE 41TONE 2PULSE shows in the display. The default setting is “1 TONE”.

3.Use the touch-tone pad or caller ID-volume ( 5 or 6) to enter 1 TONE or 2 PULSE.

4.Press the program/mute button to confirm. You will hear a confirmation tone and your selection shows in the display.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary.

From the Handset Setup Menu:

1.Press the caller ID-volume ( 6 or 5) button to scroll to the REGISTRATION sub-menu.

30