2.Press the program/mute button to enter the menu. REGISTRATION 1YES42NO - - - shows in the display The default setting is 2NO.

3.Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the caller ID-volume ( 6 or 5) button to scroll to 1YES or 2NO.

4.If you select 1YES, press the program/mute button. HOLD

BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET PROGRAM shows in the display. (Your handset should be held near the base during registration process.)

5.Press and hold the page button on the base unit, the charge/in use indicator flashes. Press the handset program/mute button. REGISTERING shows in the display. HANDSET X REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section)

NOTE: IF you are re-registering the handset through the handset menu; to rename your handset you must go to the Handset Name Section and start from the beginning step.

31

Page 31
Image 31
GE 29111 manual If you select 1YES, press the program/mute button. Hold