8
Ringer HI/LOW/OFF (Shortcut)There are two ways to set the ringer to HI/LO/OFF. One is the
traditional way as described in the Programming Functions;
Handset Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER 1HI
2LOW 3OFF.
. Use the touch tone pad on the handset to select 1, or
, or use the caller ID-volume (6 or 5) button to scroll to
your selection. HI is the default setting.
. Press #pause/ringer button again to save and display the
new selection for a few seconds.
Flash/Call WaitingIf you subscribe to the combined Call Waiting Caller ID service
from your local telephone company, you will receive Caller ID
information (if available) on Call Waiting calls. During a phone
call, you will hear a beep to indicate another call is waiting on
the line and Caller ID information for the waiting call shows on
the handset display.
• To connect to the waiting call, press the ash button on
the handset, and your original call is put on hold.
• To switch between the two calls, press the ash button.