GE 29487 manual Introduction, Before YOU Begin

INTRODUCTION

Your Four-Line Intercom Speakerphone is a full-featured phone ideally suited for home or office use. It is designed to receive calls on up to 4 incoming telephone lines and to serve up to 16 station users. In an

installed system, your phone provides such features as: 16 memory locations, 90 phone book memories, hold, conference call, intercom, call transfer, display, and speakerphone capabilities.

Please read this user’s guide carefully to familiarize yourself with all the features of your new phone. Also, make sure to retain this guide for future reference.

CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference.

NOTE: Make sure you keep these instructions for future reference. You may need to add stations or make changes to the system later.

BEFORE YOU BEGIN

PARTS CHECKLIST

Make sure your package includes the following items:

	REVIEW
1	2	3
4	5	6	LINE 4
			LINE 3
7	8	9	LINE 2
*	0	#	LINE 1

SPEAKER

Base Handset Handset cord Mounting pedestal Line cords AC power supply

CAUTION: Use only the ATLINKS, USA Inc. 5-2495 power supply that is compatible with this unit. Using other power supplies may damage the unit. To order a new power supply, call the Thomson multimedia, Inc. Mail Order Department at 1-800-338-0376.

MODULAR JACK REQUIREMENTS

To properly connect your phone to your telephone lines, you should identify the type of wall jack(s) you have. You will need an RJ11C (for a single line) or a RJ14C (for two lines) type modular phone jack, which might look like the one pictured here. If you don’t have either modular jack, call your local phone company to find out how to get one installed.

VERY IMPORTANT: In order to achieve full system operation (i.e. intercom, page, etc.), Line 1 must be connected and must be common to all phones connected to the system. Only other 29487 or 29488 models are compatible for full system operation. Connecting phones other than the 29487/88 to Line 1 may inhibit the intercom and paging operations.

For proper operation of intercom, page function, etc., DO NOT connect a DSL modem to Line 1.

To transfer a call from one station to another, the two stations should be connected to the same line.

4