GE 29897 manual Erase Messages, Leaving a Memo, Memory Full, Remote Access

ERASE MESSAGES

SINGLE MESSAGES

You can erase a message itself, leaving the Caller ID information.

•While the message is playing, press and release DELETE. The unit erases the current message and announces, “Message erased.”

ALL MESSAGES

You can also erase all the old messages only, leaving the new messages and Caller ID information.

While the unit is in ready-to-answer mode, press and hold DELETE until the unit announces, “Messages erased.”

•New messages can not be erased in this way. To erase new messages, play them then press DELETE during play back.

LEAVING A MEMO

Use the MEMO button to record a specific message for others who have access to the unit.

1.Press and hold the MEMO button. The unit announces, “Record your memo after the tone.”

2.Record your message after the beep.

3.Release MEMO when you’re finished talking. The unit treats the memo as a message, as the display shows.

MEMORY FULL

When the unit's memory is full, it answers after 10 rings and announces, “Memory is full. No messages will be recorded.” A 20-second waiting period follows, allowing you to enter your security code.

REMOTE ACCESS

You can access your answerer from any touch-tone phone from another location by entering your 3-digit security code (the default security code is 1 2 3, but you can change it.) Be aware that remote functions do not work with rotary or push-button pulse-dialing phones.

To access your answerer:

1. Call your telephone number.

17