GE 29897 manual Caller ID Features, Remote Access Commands

2.After you hear the beep that follows the greeting, enter your 3-digit security code. The unit confirms your code with a beep. To bypass the greeting, you can enter your 3-digit security code any time while the greeting is playing.

The unit waits for a remote command for 20 seconds after the correct security code has been entered. Menu selections can be made while the menu is playing.

NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beep. If memory is full, play messages and erase some of them to restore memory.

NOTE: After the unit plays the remote menu, it waits 20 seconds for a command, then disconnects.

REMOTE ACCESS COMMANDS

Play new message	1
Play all messages	2
Repeat messages
(during message playback)	5
Play previous message
(during message playback)	6
Skip to next message
(during message playback)	7
Erase message (during message playback)	0
Stop playback (during message playback)	4
Turn answerer on/off	3
End call	4

CALLER ID FEATURES

The unit receives and displays information transmitted by your local phone company. This information can include the phone number, date, and time; or the name, phone number, date, and time. The unit can store up to 99 calls for later review.

VERY IMPORTANT: The Caller ID feature of this product requires a subscription to Caller ID service from your telephone company.

NOTE: Check with your local phone company regarding name service availability.

18