GE 49-60021-2 Ice Storage Bin, Important Facts About Your Dispenser, To remove, To replace, Drive

Ice Storage Bin

To remove: Rotate

Lift the left corner to free the bin from the shelf and pull the bin straight out while supporting it at front and rear.

To replace:

Drive

Slide the bin back until the tab on the bin Mechanism locks into the slot on the shelf. If the bin

does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again until the tab on the bin locks into the slot on the shelf.

Important Facts About Your Dispenser

Safety Instructions Operating Instructions

■Add ice before filling the glass with a beverage.

■Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.

■Avoid overfilling glass with ice and use of narrow or extra-tall glasses. Backed-up ice can jam the chute or cause the door in the chute to freeze shut. If ice is blocking the chute, poke it through with a wooden spoon.

■Beverages and foods should not be quick-chilled in the ice storage bin. Cans, bottles or food packages in the storage bin may cause the icemaker or auger to jam.

■Some crushed ice may be dispensed even though you selected CUBED ICE. This happens occasionally when a few cubes accidentally get directed to the crusher.

■After crushed ice is dispensed, some water may drip from the chute.

■Sometimes a mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.

■Dispensed water is not ice cold. For colder water, add crushed ice or cubes before dispensing water.

Installation Instructions Troubleshooting Tips

Customer Service

15