OperatingInstructions SafetyInstructions
Preparing to install the refrigerator.
Door Alignment
After leveling, make sure that doors are even at the top.
To make the doors even, adjust the fresh food door. Using a 3/16″ Allen wrench or a 5/16″ socket wrench (depending on model), turn the door adjusting screw to the right to raise the door, to the left to lower it. (A nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.) After one or two turns of the wrench, open and close the fresh food door and check the alignment at the top of the doors.
Installation Instructions
Remove base grille by opening the doors and pulling the grille straight out.
3/16″ Allen Wrench |
Raise |
or |
5/16″ Socket Wrench |
Raise |
TroubleshootingTips
Dimensions and Specifications (for CustomStyle models)
24″ Cabinet
701/4″
36″
Water | Electrical |
3/4″ Airspace |
|
(1/2″ Gap + 1/4″ |
|
Wall Plates) | 25″ |
24″ Side Panels | Counter Top |
|
CustomerService
24″
20