GE 24 CustomStyle Inserting the door panels, Insert the Freezer Panel and Fresh Food Panel

Models: 24 CustomStyle 162D9617P008 49-60021-2

1 108
Download 108 pages 27.7 Kb
Page 23
Image 23
Inserting the door panels.

Inserting the door panels.

 Insert the Freezer Panel and Fresh Food Panel.Manual backgroundManual background Loosen the Top Trim on the Freezer and Fresh Food Doors.

Using a T-20 Torx driver, loosen the two screws attaching the Top Trim about 1/4″ (6 mm).

Manual backgroundManual backgroundManual background Insert the Freezer Panel and Fresh Food Panel.

Lift the Top Trim up 1/4″ (6 mm) and carefully

If your model has a dispenser and/or a

push the freezer panel in until it slides into the slot

Refreshment Center, this step only applies

behind the door handle. Push the filler panel

to the top panels.

(required with some door panels) in behind the

 

decorator panel. Repeat for fresh food panel.

 

Manual backgroundManual backgroundManual background Insert the Bottom Panel (for models with a dispenser and/or a Refreshment Center)

Carefully push the panel in until it slides into the slot behind the door handle. Push the filler panel (required with some door panels) in behind the decorator panel.

Manual backgroundManual backgroundManual background Tighten the two screws on the Top Trim to 30 in-lbs torque.

Cut-Out

Top Trim ScrewsManual background

Cut-Out

Top

Freezer Manual background

Panel

Fresh

Food

Panel

Tape Liner Manual background

Bottom

Freezer

Panel

Side Trim

Side Trim Manual background

23

Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips

Customer Service

Page 23
Image 23
GE 24 CustomStyle, 49-60021-2 Inserting the door panels, Insert the Freezer Panel and Fresh Food Panel, Customer Service