Connect the Tubing to the Refrigerator

Safety

Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

One of the illustrations below will look like the connection on your refrigerator.

Instructions

We recommend installing a water filter if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator.

1 Remove the plastic flexible cap from the water valve (refrigerator connection).

2 Place the compression nut and ferrule (sleeve) onto the end of the tubing as shown.

3 Insert the end of the copper tubing into the water valve refrigerator connection as far as possible. While holding the tubing, tighten the

1/4Copper

Tubing

Remove screws and fold back access cover.

OR

Tubing Clamp

1/4Compression Nut

Ferrule

(sleeve)

Refrigerator

Connection

Operating

fitting.

4 Fasten the copper tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Tubing Clamp

1/4Compression Nut

Ferrule (sleeve)

Refrigerator

Connection

1/4Copper

Tubing

Instructions Installation

Turn the Water On at the Shutoff Valve

 

 

Tighten any connections that leak.

 

 

Replace the access cover and screws (on some

1

 

2

 

 

 

 

 

models).

 

 

 

 

Plug In the Refrigerator

 

 

 

Arrange the coil of copper tubing so that it does not

Push the refrigerator back to the wall.

vibrate against the back of the refrigerator or against

 

 

 

the wall.

 

 

 

Instructions Troubleshooting

Start the Icemaker

Set the icemaker feeler arm to the ON (down) position. The icemaker will not begin to operate until it reaches its operating temperature of 15°F (-9°C) or below. It will then begin operation automatically if the icemaker feeler arm is in the ON (down) position.

NOTE: The icemaker may double-cycle when it first starts, causing some water spillage from the icemaker into the ice bucket. This is normal and should not happen again.

Tips

Customer Service

17

Page 17
Image 17
GE 162D7744P009, 49-60080 7-00 JR owner manual Operating, Tips, Instructions Installation

162D7744P009, 49-60080 7-00 JR specifications

The GE 49-60080 7-00 JR,162D7744P009 is a remarkable product that showcases modern engineering and cutting-edge technology, making it a must-have for those seeking performance and efficiency. Designed by General Electric, a leader in innovative development, this model is aimed at delivering optimal functionality across various applications.

One of the standout features of the GE 49-60080 is its robust design, which ensures reliability and durability even in challenging conditions. The unit is built with high-quality materials that resist wear and tear, thus extending its lifespan while maintaining operational excellence. This characteristic is particularly valuable for industrial applications where equipment failure can lead to significant downtime and costs.

The technology embedded within the GE 49-60080 is state-of-the-art, benefiting from advancements in energy efficiency. The model incorporates smart technology to monitor and optimize energy consumption, which not only reduces operational costs but also minimizes environmental impact. The integration of energy-efficient components sets this model apart, aligning with modern sustainability goals.

In terms of versatility, the GE 49-60080 is designed to accommodate a wide range of applications, making it suitable for various industries, including manufacturing, healthcare, and transportation. Its adaptability ensures that it can be tailored to meet specific operational requirements, thereby enhancing productivity and efficiency.

This model also includes user-friendly features that streamline operation and maintenance. The intuitive interface allows operators to easily access settings and monitor performance metrics in real-time. Simplified maintenance protocols mean that users can perform routine checks and servicing with minimal effort, thereby reducing downtime and associated costs.

The GE 49-60080 excels not just in performance, but also in safety features. It is equipped with multiple safety mechanisms that protect both the unit and its operators. These features are crucial for compliance with industry standards and enhance the overall reliability of the equipment.

In summary, the GE 49-60080 7-00 JR,162D7744P009 is a prime example of how advanced technology and quality design can come together to create a highly effective product. With its emphasis on durability, energy efficiency, versatility, user-friendliness, and safety, this model stands out as an excellent choice for any business looking to improve its operational capabilities. The GE 49-60080 undoubtedly represents the future of efficient and reliable equipment in today’s dynamic market.