21

Default Setting

NOTE: This setting may be made with the base or the cordless
handset.
1. Press the menu/flash button on base or mute/menu button on handset until
DEFAULT SETTING or DEFAULT shows in the display. NO is the default setting.
2. Use the touch-tone pad to select 1YES or 2NO, or press the caller id (9 or :)
button on the base or CALLER ID-VOLUME (6 or 5) button on the handset to
scroll to 1YES or 2NO.
NOTE: If you choose YES all settings in the programmable menu
return to factory defaults except day and time.
3. Press the menu/flash button on base or mute/menu button on handset again to
store your selection.
Basic Operation

Answering a Call

Check the display to see who is calling.
NOTE: You can only use one handset at a time. UNAVAILABLE will be
displayed if other handset is in use.
Cordless Handset
1. Press the TALK/CALL BACK or SPEAKER button on the handset.
2. When finished, press TALK/CALL BACK or SPEAKER button or place the handset in
charging cradle to hang up.
Corded Handset
1. Lift the handset.
2. When finished, put the handset back on the cradle to hang up.

Base Speakerphone

1. Press the speaker/call back button.
2. When finished, press speaker/call back to hang up.
NOTE: For more information, refer to "Base Unit Speakerphone
Operation" section of this manual.