GE 00017670, 25982xx3, 598 - page 42

42

Handset/Base does not ring

• Make sure the handset ringer and the base ringer is ON.

• The cordless handset may be out of range. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging some

phones.

• Check for dial tone. If no dial tone is heard, see No dial tone above.

You experience static, noise, or fading in and out

• Change channels.

• The cordless handset may be out of range of the base. Move closer to the base.

• Make sure base is not plugged into an outlet with another household appliance.

• Charge the battery.

Unit beeps

• Place the handset in the cradle for 20 seconds. If it still beeps, charge battery for

16 hours.

• Clean charging contacts on cordless handset and charge cradle with a soft cloth,

remove comma or an eraser.

• Replace the battery.

Memory Dialing doesn’t work

• Did you program the memory location keys correctly?

• Did you follow proper dialing sequence?

Unit locks up and no communication between the base and cordless handset

• Unplug the AC power adaptor from the wall outlet and the back of the base.

Remove the handset battery. Wait for 30 seconds and plug the power adaptor

back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

Contents

Main Equipment Approval Information Interference Information Hearing Aid Compatibility (HAC) Licensing FCC RF Radiation Exposure Statement Table of Contents Page Telephone Jack Requirements Introduction Before You Begin Parts Checklist Installation Digital Security System Important Installation Guidelines Base Layout Handset and Charge Cradle Layout Installing the Phone Installing the Handset Battery Installing the Phone Connecting the AC (Electrical) Power Connecting the Telephone Line Attaching the Pedestal Bracket Desktop mode: Answering System Set Up Voice Instructions Answering System Operation Recording the Outgoing Announcement Reviewing Announcement Leaving a Message Screening Calls from the Base Screening Calls from the Handset Message Playback from Base Unit Erasing Messages Leaving a Memo Telephone Set Up Language Handset Name Display Contrast Rings to Answer Security Code Base Ringer Level Handset Ringer ON/OFF Ringer Tone VIP Ring Tone Setting Day/Time Local Area Code Tone/Pulse Dialing Transfer ON/OFF Registration (Link Cordless Handset) Default Setting Basic Operation Answering a Call Base Speakerphone Making a Call Speakerphone Manual Channel Selection Call Timer Auto Standby Handset Ringer ON/OFF Shortcut Do Not Disturb Flash Call Transfer Transferring Call from Base to Cordless Handset Transferring Call from Cordless Handset to Another Cordless Handset/Base Last Number Redial Base Speakerphone Hold Paging the Cordless Handset Mute Volume Speakerphone Answering System Base Unit Speakerphone Operation Receiving a Call with Speakerphone Making a Call with Speakerphone Switching Between Speakerphone and Handset Cordless Handset Speakerphone Operation Memory Storing a Name and Number in Memory Storing a Redial Number Inserting a Pause in the Dialing Sequence Reviewing, Changing or Deleting Stored Names/Numbers Dialing a Stored Number Chain Dialing from Memory Caller ID (CID) Call Waiting Caller ID Receiving CID Records Storing CID Records (In CID Memory) Reviewing Call Records Storing CID Records in Internal Memory Dialing a Caller ID Number Deleting the Current Caller ID Record Deleting All Caller ID Records Caller ID Errors Remote Access Using the Handset Answering System Indicator Memory Full Accessing the Answering System from Another Location Changing the Security Code Changing the Battery Battery Safety Precautions Headset and Belt Clip Operation Connecting an Optional Headset to the Handset Connecting the Belt Clip Display Messages Page Handset Sound Signals Troubleshooting Guide Telephone Solutions Page Caller ID Solutions Battery Solutions Causes of Poor Reception General Product Care Service Index A B C D I L M P R Limited Warranty Accessory Information