34
Storing CID Records in Internal Memory
You may transfer a Caller ID record to your phone’s memory.
NOTE: It is important that you format CID records correctly before
storing in memory. It is not possible to reformat CID records stored
in memory.
1. Use the caller id (9 or :) button (on base) or CALLER ID-VOLUME (6 or 5) button
(on cordless handset) to scroll to the desired record.
2. Press the memory button on base or mem button on handset.
3. Press the desired memory location. Example, press the number 1 key to store the
record in memory location 1. You will hear a confirmation tone.
If the memory location is occupied and, you want to replace it, you must confirm
the replacement by pressing the memory button on base or mem button on
handset. REPLACE MEMO? shows in the display.
Dialing a Caller ID Number
When reviewing any call record in the Caller ID memory, you can dial back the
caller’s number.
1. Make sure the phone is OFF (not in talk mode).
2. Press caller id (9 or :) button (on base) or CALLER ID-VOLUME (6 or 5) button (on
cordless handset) until the desired call record is displayed.
Depending on (a) how the incoming caller’s phone number is formatted when
received, and (b) whether or not you pre-programmed your local area code into
memory, you may need to adjust the format of the caller’s phone number before
dialing it back.
The format button lets you change the format of the displayed number. Available
formats include:
Number of digits Explanation Example
Eleven digits long distance code “1”
+ 3-digit area code
+ 7-digit telephone number. 1-317-888-8888
Ten digits 3-digit area code +
7-digit telephone number. 317-888-8888
Seven digits 7-digit telephone number. 888-8888