39
Headset and Belt Clip Operation

Connecting an Optional Headset to the Handset

For hands free conversation, connect the headset (optional) to the HEADSET jack. The
handset receiver and microphone are disabled when the headset is connected.
Adjust the headset to rest comfortably on top of your head and over your ear. Move
the microphone to approximately 2 to 3 inches from your mouth.
• Press the TALK/CALL BACK button to answer or place a call before using the headset.

Connecting the Belt Clip

There are two slots, one on each side of the handset.
• Attach the belt clip by inserting the sides of the belt clip into the slots. Snap the
ends of the belt clip into place.
Display Messages
The following indicators show the status of a message or of the unit.
ANSWERER REMOTE/ Indicates the answering system is being accessed remotely.
ANSWERER REMOTE
ACCESS
BLOCKED CALL Caller information is blocked from transmission.
BLOCKED NAME/ Caller name and number is blocked from transmission.
NUMBER
DELETE? Prompt asking if you want to erase one of the 10 numbers
stored in the phone’s outgoing memory.
DELETE ALL? Prompt asking if you want to erase all Caller ID records.
DELETE CALL ID? Prompt asking if you want to erase the current Caller ID record
that is shown on the display.
DELETED Prompt confirming a CID record or stored number in memory
location is erased.
DO NOT DISTURB Indicates DO NOT DISTURB function is turned on. Ringer and
call screening is silenced.
EMPTY Indicates a memory location is vacant.