Window Installation Instructions
1WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
18″ min.
30″ to 41″
(With accordion panels)
2STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly.
To adjust for this, attach a piece of wood to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the sill to make it 1/2″ higher than the top of the storm window frame or the vinyl frame.
Attach securely with nails or screws provided by the installer.
3REMOVE THE AIR CONDITIONER FROM THE CASE
ARemove the locking screw and locking bracket from the lower frame. Save to reinstall later.
BRemove the ground screw and save to reinstall later.
Remove the ground screw and save to reinstall later
CSlide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.
4PREPARE THE WINDOW
Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.
1/2″ higher 
than storm window 
frame
Storm window 
frame
1/2″ higher
than vinyl frame (on some windows)
Wood
Sill
Vinyl frame
11
