GE AEM18* Temperature Control, Care and, Cleaning, Safety, Operating Instructions, Mode Control

Instructions

About the controls on the air conditioner—models with control knobs.

Features and appearance will vary.

Safety

Operating Instructions

	MODE
High	OFF
	High
Cool	Fan
Med	Low
Cool	Fan

Low

Cool

MODE CONTROL

TEMP

Coolest 7 1

62

53

4

TEMPERATURE CONTROL

Cleaning

Controls

Care and

The air conditioner controls are located behind the control panel door. Press to open and close the door.

Mode Control

High Cool, Med Cool and Low Cool provide cooling with different fan speeds.

Fan settings provide air circulation and filtering without cooling.

TEMP Control

The TEMP control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. When you turn the knob to a higher number, the indoor air will become cooler. Turn the knob to a lower number and the indoor air will become warmer.

NOTE: If you move the mode control from a cool	CIRCULAIRE
setting to OFF or to a fan setting, wait at least
	For continuous side-to-side air circulation,
3 minutes before switching back to a cool setting.
	set the Circulaire switch to ON.

Tips

Consumer Support

Troubleshooting

Cooling Descriptions

For Normal Cooling—Select High Cool or Med Cool with the TEMPERATURE control at midpoint.

For Maximum Cooling—Select High Cool with the TEMPERATURE control at the highest number available on your knob.

For Quieter & Nighttime Cooling—Select Low Cool with the TEMPERATURE control at midpoint.

For fixed side-to-side air direction, set the Circulaire switch to ON until the desired air direction is obtained, then move it to OFF.

6