GE AEM25* Safety Instructions, Operating, Care and Cleaning, Support, Consumer, Remote Control

Safety Instructions

About the controls on the air conditioner—models with touch pads.

Lights next to the touch pads on the air conditioner control panel indicate the selected settings.

The display always shows the room	Light indicates the unit
	is in the temperature or
temperature except when setting the	delay time Set mode.
Set temperature or the Delay timer.

Operating Instructions

Light indicates Circulaire is on.

Light indicates the delay timer is set.

Delay 1–24hr

Delay timer Decrease Mode select

Fan speed

Decrease

Temperature

set Increase

and Decrease

		Delay
M	ode		o
		Aut
		Fan
	-	F	a
n
a			n
F			+

Temp

Power

Delay timer Increase

Circulaire

Auto Fan on/off

Fan speed Increase

Unit power on/off

Air Conditioner Controls Remote Control

Controls

Care and Cleaning

Installation Instructions

Troubleshooting Tips

The air conditioner controls are located behind the control panel door. Press to open and close the door.

NOTE: The remote control will work with the control panel door open or closed.

Power Pad

Turns air conditioner on and off. When turned on, the display will show the room temperature.

Display

Shows the room temperature or time remaining on the Delay timer. Shows the Set temperature while setting the temperature in Cool or Energy Saver modes. The Set light will turn on while setting.

NOTE: The display will change to show the room temperature after settings have been made. To recall the Set temperature, press the Temp Increase ▲ or Decrease ▼ pads.

Temp Increase ▲ /Decrease ▼ Pads

Use to set temperature when in Cool or Energy Saver mode. The Set light will turn on while setting.

Delay Timer Increase ▲ (+) /Decrease ▼ (–)

Pads

Mode Pad

Use to set the air conditioner to Cool, Energy Saver or Fan Only mode.

Delay Pads

Delay ON—When the air conditioner is off, it can be set to automatically come on in 1 to 24 hours at its previous mode and fan settings.

Delay OFF—When the air conditioner is on, it can be set to automatically turn off in 1 to 24 hours.

How to set:

Press the Delay 1–24hrpad on the unit or

the pad on the remote control. Each touch of the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease – pads on the remote control will set the timer in

1-hour intervals. The Set light will turn on while setting.

To review the remaining time on the Delay 1–24hrtimer, press the Delay 1–24hrpad on the unit or thepad on the remote control. Use the Increase ▲ / Decrease ▼ pads on the unit or the Increase + / Decrease – pads on the remote control to set a new time if desired.

Support

Each touch of the Increase ▲ / Decrease ▼	To cancel the timer, press the Delay 1–24hr pad
pads on the unit or the Increase + / Decrease –	until the light on the Delay 1–24hrpad goes off.
pads on the remote control will set the delay	CIRCULAIRE Pad
time when using the Delay 1–24hrtimer ( ).
	Turn on to provide continuous side-to-side
The Set light will turn on while setting.
	air circulation.

Consumer

Fan Speed Pads

Use to set the fan speed to Low, Med, High or Auto on the unit. NOTE: On the remote control, use the fan speed Increase + / Decrease – pads to set the fan speeds to Low, Med or High. Use the Auto pad to turn Auto fan on.

4

For fixed side-to-side air direction, turn on until the desired air direction is obtained, then turn it off.