GE Mode Control, Temp Control, Controls, Cooling/Heating Descriptions, Heat Pump Models, E R C O

Consumer Support Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions

About the controls on the air conditioner—models with control knobs.

		LOW
		FAN
	OFF	HIGH
		FAN
LOW		LOW
HEAT		COOL
HIGH		HIGH
HEAT		COOL

	OFF
LOW	LOW
FAN	COOL
HIGH	HIGH
FAN	COOL

W

A

R

M

R E

C

O

O

L

E

R

C

O

O

L

E

R

MODE CONTROL TEMP CONTROL

Controls

Mode Control Temp Control

HIGH COOL and LOW COOL provide cooling with different fan speeds.

HIGH HEAT and LOW HEAT provide heating with different fan speeds.

LOW FAN or HIGH FAN provides air circulation and filtering without cooling or heating.

NOTE: If you move the switch from a cool or heat setting to OFF or to a fan setting, wait at least

3 minutes before switching back to a cool or heat setting. A 3-minute delay is automatically provided on the Heat/Cool and Heat Pump models.

Cooling/Heating Descriptions

For Normal Cooling or Heating—SelectHIGH COOL or HIGH HEAT with the thermostat at mid point.

For Maximum Cooling—SelectHIGH COOL with the thermostat at maximum cool.

For Maximum Heating—SelectHIGH HEAT with the thermostat at maximum heat.

For Quieter & Nighttime Cooling—Select

8LOW COOL with the thermostat at mid point.

The temp control is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the same level of comfort. When you turn the knob to COOLER (blue) the indoor air will become cooler. Turn the knob to WARMER (red) and the indoor air will become warmer.

Heat Pump Models

When the outdoor temperature is lower than 25°F., heat is provided by the electric heater in the air conditioner instead of by the heat pump.

NOTE: The electric resistance heater in the 115-volt heat pump model operates during defrost when the outdoor coil temperature is below 36°F. It is not intended to provide full heat capability.