About the control settings. | ge.com |
IMPORTANT: Clean the lint filter each time you use the dryer.
1Fabric Care/Temperature (on some models)
REGULAR For regular to heavy cottons. or COTTONS
REG. HEAT
MEDIUM, For synthetics, blends, delicates and items labeled permanent press.
EASY CARE
MED. HEAT,
EASY CARE or PERMA PRESS
MED. HEAT
DELICATES On some models. For delicates, synthetics and items labeled tumble dry low.
LOW HEAT
FLUFF For fluffing items without heat. Use the TIMED DRY cycle.
NO HEAT
Automatic cycles automatically determine fabric dryness. Select LESS DRY if you want your clothes slightly damp at the end of the drying cycle. Select MORE DRY if you want them to feel drier. Timed cycles run for a selected time.
2Drying Cycles
COTTONS For cottons and most linens. For most loads, select OPTIMUM DRY (on some models) or select the Preferred Regular Setting marked with an *.
EASY CARE/ For
PERMANENT
PRESS
DELICATES For delicate items,
TIMED DRY Set the Cycle Selector at the desired drying time.
DAMP DRY For leaving items partially damp.
DEWRINKLE For removing wrinkles from items that are clean and dry or that are very lightly damp.
QUICK FLUFF For freshening or fluffing up already dry clothing, fabrics, linens and pillows. Use with FLUFF NO HEAT. Provides 10 minutes of no heat tumbling.
3
Safety Instructions
Operating Instructions
Troubleshooting Tips
Color Logic (on some models)
Select the correct FABRIC CARE setting. Match the particular color below the words with the same color on the Cycle Dial.
Example: Drying a load of clothing labeled permanent press.
1
2
Choose the FABRIC CARE
Turn the Cycle Dial to the area that has the same color as the FABRIC CARE setting you have
Consumer Support
7
