DCt Connecting Up

A Important

•Before unplugging the player from the power outlet, make sure you first switch it into standby using either the front

panel (I, STANDBY/ON button, or the remote control, and wait of the -OFF-message to disappear from the player’s display.

. For the above reasons, do not plug this player into a switched power supply found on some amplifiers and AV receivers.

Using other types of video output

This player has standard (composite), S- Video and component video outputs. The main difference between them is the quality of the ptcture. S-Video delivers a better picture than standard composite video, while component video gives better picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using the best connection type available.

Connecting using an S-Video output

You can use the S-Video output instead of the VIDEO OUT jack to connect this player to your TV (or other equipment).

1Use an S-Video cable (not supplied) to connect the S-VIDEO OUT to an S-Video input on your TV, monitor or AV receiver.

Line up the small triangle above the jack with the same mark on the plug before plugging in.

Connecting using the component video output

You can use the component video outout instead of the VIDEO OUT jack to connect this player to your TV (or other equipment).

1Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver.

E n