GE DV-354 Playing discs, cGetting Started, page, page, page, pages 27,28, 3 Load a disc, 4 Press ) (play) to start playback, 2Press & OPEN/CLOSE to open the disc tray

cGetting Started

Playing discs

The basic playback controls for playing DVD, CD, Video CD and MP3 discs are covered here. Further functions are detailed in the next chapter,

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double-sided DVD disc, load it with the side you want to play face down),

4 Press ) (play) to start playback.

If you’re playing a DVD or Video CD, a menu may appear. See pages 27,28 for how to navigate these.

If you’re playing an MP3 disc, it may take a few seconds before playback starts, depending on the complexity of the file structure on the disc,

If you loaded a CD/CD-R/RW containing JPEGs, a slideshow will start. See page 50 for more on playing these discs.

1If the player isn’t already on, press 0 STANDBY/ON to switch it on.

If you’re playing a DVD or Video CD, also turn on your TV and make sure that rt is set to the correct video input.

2Press & OPEN/CLOSE to open the disc tray.

•After I load a DVD disc, it ejects automati- cally after a few seconds!

Most likely, the disc is the wrong region for your player. The region number should be printed on the disc; check it against the region number of the player (which you can find on the rear panel). See also page 55.

If the region number is OK, it may be

that the disc is damaged or dirty. Clean
the disc and look for signs of damage.
See also page 52.	EM
	E n