GE DV-354 (The Audio Settings Menu, Audio DRC, Virtual Surround, On, Off, Digital Out, Dolby Digital Out, Dolby Digital > PCM. See page

	I .
(The Audio Settings Menu
	>a

Audio DRC

•Default setting: Off

When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely-including some of the dialog. Switching Audio DRC (Dynamic Range Control) to On can help by bringing up the quieter sounds, while controlling loud peaks,

How much of a difference you hear depends on the material you’re listening to. If the material doesn’t have wide variations in volume, you may not notice much change.

1Press SETUP and select ‘Audio Set- tings’ from the on-screen display.

IH Note

Audio DRC is only effective with Dolby Digital audio sources.

Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out is set to

Dolby Digital > PCM. See page 41.

The effect of Audio DRC depends on your speakers and AV receiver settings.

Virtual Surround

•Default setting: Off

Switch on Virtual surround to enjoy surround sound effects from just two speakers.

When you play a Dolby Digital soundtrack, Virtual Dolby Digital, which uses TruSurround technology from SRS, produces a deep, realistic 3D soundspace from a pair of stereo speakers.

2 Highlight Audio DRC, then use thet / + buttons (cursor left/right) to change to ‘On’ or ‘Off’, as required.3 Press ENTER to make the setting and exit the Audio Settings screen.

m.

E n