-.

 

 

a,( The Initial Settings Menu

 

--=~----I3

0

 

 

 

 

DTS Out

•Default setting: Off

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

If your AV receiver (or other connected component) has a built-in DTS decoder, set this to DTS, otherwise set to Off. Check the manual that came with the other componen t if you’re unsure whether it is DTS compat-

i ble.

I# Note

If your AV receiver (or other connected component) is compatible with high sampling rates (96 kHz), set this to 96kHz, otherwise set it to 96kHz > 48kHz (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

MPEG Out

•Default setting: MPEG > PCM

You only need to make this setting ifyou connected this sys tern to an AV receiver (or other component) using one of the digital outputs.

olsplay Options

•If you set to DTS with a non-DTS compatible amplifier, noise will be output when you play a DTS disc.

96kHz PCM Out

•Default setting: 96kHz > 48kHz

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

If your AV receiver (or other connected component) is compatible with MPEG audro, set this to MPEG, otherwise set it to MPEG > PCM (MPEG audio is converted to more compatible PCM audio), Check the manual that came with the other component if you’re unsure whether it is MPEG audio compat-

i ble.

m1

E n